+20 100 000 0000
info@zprime.com
Sun - Thu : 09 AM - 05 PM

Our Products

Product Range

5" / 125 mm Range

Three discs for the 125 mm angle grinder — cutting, grinding and the ultra-thin biscuit cut. All rated to a maximum 12,250 rpm (80 m/s) with a 22.23 mm bore.

Z Prime 5 inch cutting disc, 125 x 3.0 x 22.23 mm
5" — Cutting

5" Cutting Disc

A 3.0 mm cutting disc for 125 mm angle grinders — the everyday size for general fabrication, steel cutting and installation work where control matters as much as speed.

Specification
125 x 3.0 x 22.23 mm
Max 12,250 rpm (80 m/s)
EN 12413 — A46S BF
Metal / stainless steel
For angle grinder
Made in Egypt
Designed For
General metal fabrication
Steel and stainless steel cutting
Workshop and site cutting
Installation and maintenance work
Profile, tube and bar cutting
Request a Quote
Z Prime 5 inch grinding disc, 125 x 6.0 x 22.23 mm
5" — Grinding

5" Grinding Disc

A 6.0 mm depressed-centre grinding disc for 125 mm angle grinders, built for steady stock removal and weld dressing without loading up.

Specification
125 x 6.0 x 22.23 mm
Max 12,250 rpm (80 m/s)
EN 12413 — A46S BF
Metal / stainless steel
For angle grinder
Made in Egypt
Designed For
Weld grinding and dressing
Edge and bevel preparation
Surface preparation on steel
Deburring and shaping
Maintenance and repair work
Request a Quote
Z Prime 5 inch biscuit cutting disc, 125 x 1.2 x 22.23 mm
5" — Biscuit

5" Biscuit Cutting Disc

The ultra-thin 1.2 mm «biscuit» disc — a fast, low-burr cut with minimal material loss and far less heat into the workpiece.

Specification
125 x 1.2 x 22.23 mm
Max 12,250 rpm (80 m/s)
EN 12413 — A46S BF
Metal / stainless steel
For angle grinder
Made in Egypt
Designed For
Thin sheet and tube cutting
Stainless steel without discolouration
Fast, burr-free cuts
Precision and finishing cuts
Light fabrication work
Request a Quote
Product Range

9" / 230 mm Range

The same three discs scaled up for the 230 mm angle grinder, for heavy sections and structural steel. All rated to a maximum 6,650 rpm (80 m/s) with a 22.23 mm bore.

Z Prime 9 inch cutting disc, 230 x 3.0 x 22.23 mm
9" — Cutting

9" Cutting Disc

A 3.0 mm cutting disc for 230 mm angle grinders, giving the depth of cut heavy sections need in a single pass.

Specification
230 x 3.0 x 22.23 mm
Max 6,650 rpm (80 m/s)
EN 12413 — A30S BF
Metal / stainless steel
For angle grinder
Made in Egypt
Designed For
Structural steel cutting
Heavy fabrication
Pipe and steelwork
Construction applications
Industrial maintenance
Request a Quote
Z Prime 9 inch grinding disc, 230 x 6.0 x 22.23 mm
9" — Grinding

9" Grinding Disc

A coarse A24S grain on a 6.0 mm body — maximum removal rate over large weld seams and heavy steel sections.

Specification
230 x 6.0 x 22.23 mm
Max 6,650 rpm (80 m/s)
EN 12413 — A24S BF
Metal / stainless steel
For angle grinder
Made in Egypt
Designed For
Heavy weld removal
Structural steel dressing
Foundry and casting cleanup
Large-area surface preparation
Shipyard and heavy industry
Request a Quote
Z Prime 9 inch biscuit cutting disc, 230 x 1.2 x 22.23 mm
9" — Biscuit

9" Biscuit Cutting Disc

The 1.2 mm «biscuit» disc in 230 mm — full 9" reach with a thin kerf, for fast cuts through large sections with minimal waste.

Specification
230 x 1.2 x 22.23 mm
Max 6,650 rpm (80 m/s)
EN 12413 — A30S BF
Metal / stainless steel
For angle grinder
Made in Egypt
Designed For
Large-diameter pipe cutting
Fast cuts on heavy profiles
Stainless steel sections
Reduced kerf and material loss
Site and fabrication work
Request a Quote
Request a Quote

Tell Us The Size, Spec And Quantity You Need

From workshop fabrication to heavy industrial applications, Z Prime aims to provide abrasive products that deliver the right balance of performance, durability and value. Send us your requirement and our team will recommend a suitable abrasive solution and come back with pricing.

Z Prime

Industrial abrasive solutions for cutting, grinding and surface finishing — built for fabrication, construction, maintenance and industry.

Get In Touch

Cairo, Egypt

+20 100 000 0000

info@zprime.com

Our Products

5" Discs — 125 mm 9" Discs — 230 mm Biscuit Cutting Discs Applications Industries We Serve

Request a Quote

Tell us the size, specification and quantity you need and our team will come back to you.

Get a Quote
© Z Prime, All Right Reserved.
Designed By DevMRM